![]() Specifically designed for the film and television industry, Blackmagic MultiDock 10G features a rack mount design. Advanced SSD dock with four separate SSDs that can be accessed via a single high speed 10 Gb/s USB-C connection. The only thing that I can think of out of the ordinary that the drives are formatted as NTFS which is not in the manual) but I cannot think of why this would be a problem. Specifically designed for the film and television industry, Blackmagic MultiDock 10G features a rack mount design. When I re-plug the Mutldock behaves as expected with the drives remounting and the lights flashing only when the SSDs are accessed. I have to either cut power or the USB connection to the Multidock. When I boot the Windows 10 PC in the morning (with the drives still flashing on the Multidock) the drives do not remount. Unlike cheap consumer adapters, Blackmagic MultiDock 10G has been specifically designed for the film and television industry and features a rack mount design with an independent SATA driver chip on each disk. This continues indefinitely (at least overnight) regardless of the computer being shutdown. Blackmagic MultiDock 10G is an advanced SSD dock that lets you access 4 separate SSDs via a single high speed 10 Gb/s USBC connection. When I shutdown the computer off the 2 drive bays start flashing as though being accessed, even though they weren't being accessed before the shutdown and the lights were off. The USB-C A drives are connected to a USB-A 3.1 port using a USB 3.1 cable. I am aware that he manual says to use ExFAT so one of my questions below is based around that. The track header on track A1 indicates a mono track with a single lane for mono audio and the A2 track header indicates a stereo track with two lanes to accommodate. Both are formatted to NTFS as they came from other systems. The first is a Samsung EVO 860 4TB and the second a Samsung EVO 860 2TB. I have it set to divide the drives between two computers but currently only the A drive is connected, it contains two SSDs. Yes, in some rare instances, it is slower than the older dock - but you can use two separate USB 3.1 connections to get around that.New user here - I have recently purchased a Multidock 10G for use with a music studio based around Windows 10. Blackmagic MultiDock 10G can be configured as a single unit with 4 drives, or as two independent dual-drive docks. 151,984. Depending on the model of your Mac, it’s worth getting USB cables capable of USB 3.1(10gbps - which is the max transfer rate for the new dock. Getting Started 5 Introducing MultiDock 5 Connecting to your Computer 6 Plugging in your Drives 6 Using Blackmagic MultiDock 7. To use the new multi dock on a new Mac Pro or modern Mac, just use a USB cable with both ends having USB C connectors. I think 2015 uses 3.1 from memory - but a 3.0 connection will work, just potentially a tiny bit slower depending on your use. I mounted the SMB/CIFS share from the POD and used the Windows machine to move the files onto the PC. To use it on an 2015mbp or 2013 trash can, just use a USB A to USB C cable. BTW: I connected the SSD to the secondary USB-C connection since I connected the first to the BM MultiDock 10G (which was supposed to read 'any SSD'). Therefore, you do not use a thunderbolt dongle at all. ![]() The new multi docks with USB c connection are *not* thunderbolt. It can even be used for SSD compatibility on HyperDeck Extreme Only Blackmagic MultiDock 10G gives you the industrial strength design you need for professional. ![]() To connect it to a newer Mac with tb3, you need a tb3 to tb2 dongle from Apple. It can be connected to both trash can and 2015mbp using a thunderbolt 2 connection. Aufnahmegebhr Steckrbe Ungerecht blackmagic ssd dock Publikum Krokodil Renovieren Blackmagic Design MultiDock 10G Rack Mount 4-Slot USB-C Disk Dock. ![]()
0 Comments
Leave a Reply. |